Vertical Glass Cleaner
Now we would like to introduce our vertical glass cleaner.
Ordinary glass cleaners are designed to place glasses horizontally on conveyors through cleaning process. But we have also made cleaners placed on conveyors vertically.
The advantage of vertical cleaner is that the width of the cleaner unit can be considerably smaller than horizontal type. In addition there is another advantage over horizontal layout cleaners. In case of vertical cleaners, the conveyor rollers contacts with glasses only at the thin edge. Therefore there will be no roller contact mark on the glass surface and particles generated from rollers are minimized.
The vertical cleaner we made was for the glass 1,400 x 1,100 mm with thickness of 3.2 mm.
Please contact us if you are interested in the vertical cleaners.
Glass cleaners for curved glasses in automobile application
This time, we would like to introduce our glass cleaners for curved glasses in automobile application.
Our cleaner is good to clean curved glasses such as windshield, side glasses, rear glass and roof top glass (can be called sun shield glasses, moon glasses and so on), by means of scrubbing brush and/or high pressure water jet. We actually supplied such cleaners for reinforced glasses and multiple layer glasses of 600 to 1850 mm width to automobile glass manufacturers.
Such adjustment as brush height, and as angle and height for air knife to remove water are automatically done by touch panel recipe. Not to mention, we have many experiences of delivering cleaners for flat panel prior to curving procedure.
We are glad to realize various requests by customers based on our long engineering experience.
Please feel free to contact us for any topics you would like to discuss with us.